Fasco D1107 OEM Replacement Motor, 1/10 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO Wash Down

Fasco D1107 OEM Replacement Motor, 1/10 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO Wash DownOEM Direct Replacement Motor 3. 3" Diameter Shaded Pole Thermally Protected Open Air Over Class B Insulation, 40C Ambient Ball Bearing 5 16" Diameter Shaft with Flat 25" Leads Belly Band Mount (Belly Band Not Included) Additional Information Thermal ProtectionThermally Protected Speed1550 rpm Current3. 20 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation ClassB CSAY Weight5. 00 LB Country Of originMexico Output HP1 10 Hp Output KW0.

CAT NO ECR9756TR-4 HP 75 RPM 1185 D

Load 91° C Start Configuration DOL Break-Down Torque 44

Amperes 1075 A LRC 8

Rise @ Rated Load 20° C Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Reference RW67 Number of poles 3 poles Mounting type Direct Contactor model CWM50-80 Current range 57-70 A Attributes

MN416A01 TAG-INSTAL-MAINT no wire (2100bx)4/22 35CB3000SP CONDUIT BOX

269 Ohms A Ph / 1

8 LB-FT Pull-Up Torque 50

7 NEMA NOMINAL EFFICIENCY 86

06 % Rated voltage 208-230/460 V Rated current 6

Reference MPW65 Maximum rated current Ie 65 A Setting range for thermal release 50-65 A Number of poles 3 Short-circuit release 13 x Iemax Rated operational voltage Ue 690 V Rated operational frequency 50/60 Hz Rated insulation voltage Ui 690 V Rated impulse withstand voltage Uimp 6 kV Utilization category - IEC60947-2 (motor starter protector/circuit breaker) A Utilization category - IEC60947-4-1 (Motor Starters) AC-3 Trip test Yes Overload protection Yes Phase failure sensitivity Yes Trip indication Yes Tripping class 10 Maximum operating frequency (ops

42 IN Power Factor 79 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1