Square Head Screw Full Thread Black-Oxide Alloy Steel 1/2-13 * 10" Grade 8 [Cup Point] [External Square Drive] length_7

Square Head Screw Full Thread Black-Oxide Alloy Steel 1/2-13 * 10" Grade 8 [Cup Point] [External Square Drive] length_7Use these set screws for light duty holding. A square head allows them to be turned by hand, or fastened with a wrench when you need more torque. The cup point has a thin edge that digs into the contact surface for a secure hold. Length is measured from under the head. The screw has a length of 10" and a thread of 1 2 13.

The screw has a length of 4" and a thread of 1-3/4-5

The rod has a length of 36 and a thread of 1-1/8-7

The screw has a length of 2-3/4" and a thread of 9/16-12

The rod has a length of 144" and a thread of 1/2-13

The screw has a length of 4" and a thread of 5/16-18

This hexagonal bolt has a length of 2-1/2" with a threading of 1-1/4-7 [Fully Threaded]

The screws have a thread of 1-3/4-5 and a length of 8

The screw has a length of 8 and a thread of 3/4-16

Coarse threads are the industry standard: choose these screws if you don’t know the pitch or threads per inch

These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end

This hexagonal bolt has a length of 6" with a threading of 1-1/4-7 [Partially Threaded]

They include a tag that shows the material