Eye Bolts Without Shoulder Hot Dip Galvanized 7/8-9 * 5" set_screw

Eye Bolts Without Shoulder Hot Dip Galvanized 7/8-9 * 5" set_screwAlso known as nut eyebolts, these are designed for through hole applications. Galvanized steel eyebolts have a hot dipped finish for corrosion resistance. The bolts have a thread of 7 8 9 and a length of 5. Note: Capacities listed are for vertical lifting only. Eyebolts without shoulder are for vertical lifting only. Warning: Never use to lift people or items over people. The bolt has a maximum load of 7200 lbs.

The elbows have a 3-8 thread and they are 45 degrees

This hexagonal bolt has a length of 5" with a threading of 1-1/2-12 [Partially Threaded]

The screws have a thread of 3/4-10 and a length of 18

This rod has a length of 36 and a thread of 1-1/2-12

The screw has a length of 5/8" and a thread of 1/2-13

The screws have a thread of 1-3/8-6 and a length of 8

The screws have a thread of 1-1/8-7 and a length of 10

The screw has a length of 4-1/4" and a thread of 3/8-16

Fine and extra-fine threads are closely spaced to prevent loosening from vibration: the finer the thread

They're angled under the head to sit flush within countersunk holes

The screw has a length of 3-1/4" and a thread of 7/8-9

000 psi | Rockwell C25