WagnerTuning BMW E-Series N55 EVO2 Competition Decat Package leyo cold air intake system

WagnerTuning BMW E-Series N55 EVO2 Competition Decat Package leyo cold air intake systemWagner Tuning BMW E Series N55 EVO2 Competition Decat Package Upgrade your BMW N55 with the Wagner Tuning EVO2 Competition Decat Package featuring a high capacity intercooler and catless performance downpipe for improved airflow, lower intake temperatures, and faster turbo response. The EVO2 Competition intercooler features a stepped core design measuring 520mm x 210mm x 150mm, delivering 90% more volume and 85% larger frontal area compared to the

Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated

214 cm³ volume

Supports higher power goals without compromising reliability

High flow cast end tanks ensuring optimum air transition for cooling efficiency

94% Larger Volume than OEM

With an increase in volume of water introduced to the cooling system the thermal temperatures can be kept at a much reduced level over a longer period

Install is a snap

4 Available Analog ReadoutsAnalog boost (yellow/purple/black – dedicated plug for analog boost sensor) *boost tap not includedAnalog input 1 (brown wire – can read any 0-5 volt linear output sensor)Analog input 2 (blue wire – can read any 0-5 volt linear output sensor)Battery voltage (red wire / black wire – read through power and ground wires)optional auto-dim feature (green wire – connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)Optional Add-OnsOBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not includedLC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle’s Air/Fuel Ratio

0 TFSI B7 Quattro and DTM

We conducted flow rate tests using a Superflow SF-1020 to measure the maximum flow rate possible at a pressure drop of 28” H2O

MST Induction Kit – 2

Illumination:– Red only