Fasco D794 Condenser Fan Motor, 1/5 HP, 1 Ph, 60 Hz, 208-230 V, 825 RPM, 1 Speed, 48 Frame, CLOSEDAO DECENTRALIZED CONTROL STATIONS PBW

Fasco D794 Condenser Fan Motor, 1/5 HP, 1 Ph, 60 Hz, 208-230 V, 825 RPM, 1 Speed, 48 Frame, CLOSEDAO DECENTRALIZED CONTROL STATIONS PBWCondenser Fan Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 5 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Totally Enclosed Air Over Class B Insulation, 60C Ambient Design Upgrade, Converting From Sleeve Bearing to Ball Bearing 1 2" Diameter Shaft with Double Flat 55" Leads Extended Studs Shaft End and Lead End, Mounting Holes in Shell, Belly Band Mount (Belly Band Not Included) Additional

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 0526M Mounting Arrangement F1 Number of Poles 4 Overall Length 13

76 HP - TEFC-IP55 - 1485 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 73

weight³ 90

625 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 1425 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location SK Winding Thermal 2 None XP Temp Code T3C Drawings

39 NEMA NOMINAL EFFICIENCY 70

4x(Code H) No load current 2

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 10 AWG Motor Type 3752M Mounting Arrangement F1 Number of Poles 4 Overall Length 20

91 Ohms A Ph / 0 Ohms B Ph Temp

451 ohms Shunt Winding Resistance 428 ohms Armature Inertia 38

CD6219 SPEC

6 POLES 6 NUMBER SPEEDS 1 RPM 1180 RPM 2 1180 RPM 4 975 RPM 5 975 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 4 380 VOLTS 5 190 FRME 324 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION W6 MOTOR TYPE CTNI OPPOSITE END BEARING 6311-2RS-J/C3 SHAFT END BEARING 6311-2RS-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

40-0000-0209 HZ 60 VOLTS 200/400 AMPS 156/78 EFF 93 RATING 40C AMB-CONT Parts