Lawson Shoe Platen for Epson DTG Printers size-5-gallon

Lawson Shoe Platen for Epson DTG Printers size-5-gallonPrint Perfect Shoes with Lawsons DTG Shoe Platen Lawsons Shoe Platen for Epson DTG Printers and compatible machines is designed for printing on high top tennis shoes, canvas shoes, or any footwear that fits this specialized platen. This Epson DTG shoe platen requires specific techniques and testing for optimal use. For example: Use double sided tape to secure the shoe. Adjust the print height to avoid eyelets. Select the highest print quality mode for

Silicone-based paper may seal the pretreatment on the fabric surface

Print in reverse and transfer at high transfer temperature 310°F - 330°F with firm pressure for moderate dwell time (10-15 seconds)

Important Application Directions: Image Lock - CMYK can be applied with any automatic spray unit

Clear Matte is printed in mirror image on the hot-melt side of the film

Make us your one stop shop for all your Epson needs

Unlike other mechanical meters with softer brass gears and bushings

allowing the zipper to drop below the print area to prevent damage to the Epson print head and avoid height error warnings

Application Time 10–15 seconds

Curing: FastINK Textile inks require a simple 1-minute heat cure at 325°F (165°C) fabric dependent

Easily interchangeable

VersaArt and VersaCAMM printers

we remesh them with high-quality A+ mesh to ensure maximum printing quality