Bando SPA1272 Metric V-Belts Super-E Chemical ProcessingBando SPA1272 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery
33 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
Transformer Mounting OptionFoot
lb Locked rotor torque 200 % Breakdown torque 260 % Locked rotor time 32s (cold) 18s (hot) Moment of inertia (J) 10
D XP Division Division II Agency Approvals CSA EEV NEMA PREMIUM NEMA_PREMIUM UR CCSA US Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 24
Degree of Protection IP55 Enclosure IC410 - TEAO Mounting F-2 Rotation¹ Both (CW and CCW) Noise level² 61
Application MPW25/MPW40+CWM32 Type ECCMP Rated insulation voltage 690 V - 50/60 Hz Maximum current 32
Bando - 150-S3M-222UK Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile
4x(Code J) No load current 23
24 IN Power Factor 68 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
8 LB-FT Starting Current 14
Thread size NPT 3/4" Products Line W01 Rolled Steel Downloads
Load 41° C Start Configuration DOL Break-Down Torque 49 LB-FT Pull-Up Torque 27
