Genuine E3D Nozzle X - V6-1.75mm x 0.80mm (V6-NOZZLE-4TC-175-800) TAW Global

Genuine E3D Nozzle X - V6-1.75mm x 0.80mm (V6-NOZZLE-4TC-175-800) TAW GlobalFeatures: Less build up, particularly of sticky and filled materials to the nozzle cone Improved first layer reliability; the slick coating has a reduced tendency to drag material, particularly at sharp corners where tracks can peel up Easier nozzle cleaning, what little material that does adhere is easily wiped away with a paper towel leaving a very clean nozzle. Details: Less build up, particularly of sticky and filled materials to the nozzle cone

(250mm)  Handpiece Weight3(w/o cord)  0

We upgraded the following stock components for the best we sell in order to create the bacon of HotEnds: 01

Quick release also makes tinkering with your HotEnd a doddle

as the hardened nozzles will lose some hardness at these temperatures

Customisable Switch up your HotEnd with the full E3D ecosystem of blocks

FM2032-51  Iron Holder w/sponge

Simply connect your power supply's positive wire to the 8-30V input lug

Adjustable temperature control

two filters

More than just bling

)  Outer Dimensions  162(W) x 100(H) x 239(D) mm  Country of Origin  JPN  Safety Approval *Value is based on a full standard crucible at idle after calibration

Undrilled nozzles allow users to experiment with boring their own holes