Bando P96H300 E QD Timing Belt Pulley (E) FUNCTION EXPANSION MODULESBando P96H300 E The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
9 Ohms B Ph Temp
Load 88° C Start Configuration DOL Break-Down Torque 534 LB-FT Pull-Up Torque 269 LB-FT Locked-Rotor Torque 283 LB-FT Starting Current 440 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
79 IN Power Factor 80 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1
lb Locked rotor torque 200 % Breakdown torque 260 % Locked rotor time 46s (cold) 26s (hot) Moment of inertia (J) 0
865 LOCKED ROTOR TORQUE UOM OZFT LOCKED ROTOR AMPS 2
67 % Rated voltage 400/690 V Rated current 355/206 A L
3 LB-FT Starting Current 61 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
WagnerWG840584
Amperes 1968 A LRC 8
5x(Code H) No load current 60
2 FULL LOAD AMPS PRIMARY 10
97 % Rated voltage 575 V Rated current 354 A L
