Hornady 35 Cal .355 165gr FTX Component Bullets for Handloading brand_-Knivegg

Hornady 35 Cal .355 165gr FTX Component Bullets for Handloading brand_-KniveggThe Hornady FTX 35 calibre . 355 diameter 165 grain bullet is a component projectile designed for handloaders working with lever action pistol cartridges such as . 357 Magnum. It is not loaded ammunition this is a bare bullet head sold for reloading. The FTX design brings Hornady's patented Flex Tip technology to handgun cartridges: the soft polymer tip compresses into the bullet on impact, initiating controlled expansion across a wide range of

priming and seating operations

sized to 30mm rings at 19mm height (Medium) to suit 30mm-tube optics including Pulsar Thermion thermal riflescopes

achieving this through a reduced 30 mm objective diameter that allows thinner lens elements at closer spacing

the support hand used by left-handed rifle and pistol shooters

so it tracks the rifling rather than sitting straight down the bore

so the rod glides down the bore without abrading the rifling

- Large back-lit LCD display with easy-to-see controls

Leaving the muzzle at around 2

Sako 75 and Sako L461

putting out up to 800 lumens on full power for a strong beam that reaches well beyond typical torches — handy for checking ground at night or signalling for help

Optimal performance in a pocket-sized format Whether you are strolling in the park or on a long walking tour

its adjustable collet system indexes directly on the case shoulder