Bando SPZ1387 Metric V-Belts PAD MOUNT

Bando SPZ1387 Metric V-Belts PAD MOUNTBando SPZ1387 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery

5 POLES 2 POLES 2 4 NUMBER SPEEDS 2 RPM 3450 RPM 2 1725 HERTZ 60 VOLTS PRIMARY 230 V VOLTS 230 FRME 56 SHAFT CODE J STATOR DIAMETER 6

Frame 284/6TS Output 20 HP (15 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2954 rpm Slip 1

00 A Rated torque 72

Frame Material Cast Iron Impregnation Method Constant Resin Flow Regreasing System At Drive end and Non-drive end Main terminal box hole NPT 3" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 3002 203A (ISO 12944 - C2) Grounding Lugs Double Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover With Overload protector (phenolic) Without overload protector Connection Cables Quantity 6 Features

1 RPM 1760 FRAME 145T SER

9x(Code G) No load current 58

TraneMOT12883

5" Leads with Pin Housing Terminal

8x(Code J) No load current 6

1 % Electrically Isolated Bearing Not Electrically Isolated Enclosure Modification 661 Feedback Device NO FEEDBACK High Voltage Full Load Amps 46

CAT NO ZDM4117T SPEC

Rated current 9 A Reference CWM Main contact 3 NO Control voltage 42V 50Hz/48V 60Hz Terminal type Screw Attributes