Fasco D1246 OEM Replacement Motor, 1/15 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 4.4" Diameter, OAO Farm Duty

Fasco D1246 OEM Replacement Motor, 1/15 HP, 1 Ph, 60 Hz, 115 V, 1550 RPM, 1 Speed, 4.4" Diameter, OAO Farm DutyOEM Direct Replacement Motor 4. 4" Diameter Shaded Pole Thermally Protected Open Shaft End and Lead End End Frame, Enclosed Shell, Air Over Class B Insulation, 40C Ambient Sleeve Bearing 3 8" Diameter Shaft with Flat 8" Leads with Molded Plug Hex Mounting Hub Shaft End and Lead End Additional Information Thermal ProtectionThermally Protected Speed1550 rpm Current2. 3 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation ClassA CSAY

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR CSA EEV CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage

Power supply 380-480 V Input phases Three-phase Configuration With options Rated current (ND) 17 Rated current (HD) 13

37N046R366G1 HP 10 VOLTS 230/460 AMP 25

3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 0748M Mounting Arrangement F1 Number of Poles 6 Overall Length 20

Catalog Number CEM3704T-G Enclosure TEFC Frame 213TC Frame Material Steel Frequency 60

766 Line Amps 9

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code H Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3520L Mounting Arrangement F1 Number of Poles 2 Overall Length 12

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 4 @ 14 AWG

Start Configuration DOL Break-Down Torque 21 LB-FT Pull-Up Torque 17 LB-FT Locked-Rotor Torque 18 LB-FT Starting Current 10

00 LEAD HOLE 09FH4000SP 309 FH - BLACK PRIMER 10CB3500SP CONDUIT BOX LID

Break-Down Torque 154 LB-FT Pull-Up Torque 67

0 V Design Code A Drip Cover No Drip Cover Duty Rating CONT Electrically Isolated Bearing Not Electrically Isolated Enclosure Modification Severe Duty Features Feedback Device NO FEEDBACK High Voltage Full Load Amps 18