TC2-1 Tread Cutter Chains Chain Location:Intermediate Drive Chain

TC2-1 Tread Cutter Chains Chain Location:Intermediate Drive ChainThe TC2 1 Tread Cutter uses 2 chains of varying length. Like any wear item, they eventually need to be replaced; however, proper maintenance will maximize performance and lifespan. The Intermediate Drive Chain runs from the gearbox diagonally to the upper jaw of the machine on the left hand side, from the operator's position. The Final Drive Chain runs horizontally along the upper jaw on the right hand side of the machine, supplying power directly to

2 Position

Floor space: 33” x 33” x 7' (84cm x 84cm x 2

Size & Weight:

It receives a 400lb batch of colorized rubber mulch (or similar aggregate) from EECO's MD3-1 Mixing Drum and dispenses it into an Elevator Bucket Conveyor for bagging in EECO's BM1-1 Bagging Machine

inject fresh grease daily

Place a tread over the tread draping shafts

5KW) Single-Phase Motor

Repeat steps 2&3 until the machine indicates that a bale is full

The only maintenance required is to keep the drive chain lubricated and adjusted

25" Cutting Blade

subsequently

the wheels will pull the tread through as they cut