Safety-Pin Shackles Hot Dip Galvanized 1-3/4 thread_size_9-16-12

Safety-Pin Shackles Hot Dip Galvanized 1-3/4 thread_size_9-16-12A bolt fastened with a nut and cotter pin makes these shackles more secure than screw pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors. Galvanized steel shackles have a thick coating for corrosion resistance. Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

the inside threads have a thread of 1-1/2-11-1/2

a width of 6 and a length of 2

This hexagonal bolt has a length of 8-1/2" with a threading of 1/2-13 [Partially Threaded]

This hexagonal bolt has a length of 9-1/2" with a threading of 1-1/4-7 [Partially Threaded]

The bolts have a thread of 1-8 and a length of 6

Match the thread spacing of mating components

This hexagonal bolt has a length of 11 with a threading of 3/4-10 [Partially Threaded]

This hexagonal bolt has a length of 7 with a threading of 1-8 [Partially Threaded]

The elbows have a 1-1/4 thread and they are 90 degrees

The screw has a length of 7" and a thread of 9/16-12

The Grade 12 increases its strength against the pressure and has a tensile strength and hardness of 180

Bronze screws are about 40% stronger than brass screws and provide more corrosion resistance to salt water