Bando 1350H300G H Timing Belt CONNECTION BAR SETS (CONTROLS)Bando 1350H300G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.
Bando - 260J5 Rib Ace® is an ultra-thin
EM3546 SPEC 35A011G004G1 HP 1 VOLTS 230/460 AMPS 3
Frame 324/6T Output 30 HP (22 kW) Number of Poles 6 Frequency 60 Hz Rated speed 1125 rpm Slip 6
67 VOLTS 460 AMP 2
0 a Heater Indicator No Heater Insulation Class H Inverter Code Not Inverter IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 1264M Mounting Arrangement F1 Number of Poles 6 Overall Length 30
Bando - 9-5V975 To resolve problem applications where belts are flipping over or jumping out of the sheaves
2 FULL LOAD AMPS PRIMARY 7
8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3524M Mounting Arrangement F1 Number of Poles 6 Overall Length 11
Packard63992
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 9
Bando - 4-5MS730 Ideally suited for short center distances and small diameter pulleys
Standard NEMA MG-1 Frequency 60 Hz Voltage 380 V Number of poles 4 Synchronous speed 1800 rpm Output rating 15 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors
