Eye nut Hot Dip Galvanized 1/2-13 * 1-1/4 Quantity:Unity

Eye nut Hot Dip Galvanized 1/2-13 * 1-1/4 Quantity:UnityCreate your own lifting eye by adding an eye nut to a stud or bolt. Galvanized steel eye nuts have a hot dipped finish for more corrosion resistance than zinc plated steel. The nuts have a thread of 1 2 13 and a lenght of 1 1 4. Note: Working Load Limit applies to the eye nut only. The stud or bolt you use will affect the overall Working Load Limit. Eye nuts are for vertical lifting only. Warning: Never use to lift people or items over people. Nuts

Also known as machinery eyebolts

a width of 20 and a length of 2

it features a shear strength of 45

The bolts have a thread of 3/4-10 and a length of 4-1/2

It is made of 316 stainless steel

This rod has a length of 36 and a thread of 9/16-18

Anchors listed for cracked concrete are often required in environments which may cause concrete to crack during the life of the anchor

000 psi | Rockwell C38

please select components that have the same thread direction and size

These nuts tighten when turned to the left: once fastened

This plow bolt has a length of 4" with a threading of 1-1/4-7 [Partially Threaded]

Also known as nut eyebolts